-
Why I stopped comparing lighting prices on a spreadsheet
-
Recessed light vs downlight: the $2,400 mistake I made in 2023
-
Grow lights: why the SE7000 comparison isn't about price per watt
-
Smart fan controllers: the surprise ROI win
-
Flood lights vs bar chandeliers: lighting different messages
-
So what should you actually do?
Why I stopped comparing lighting prices on a spreadsheet
I manage procurement for a 140-person company that runs both indoor growing operations and commercial office space. Over the past six years, I've signed off on roughly $1.2 million in lighting-related spending — fixtures, controllers, replacement parts, the whole picture.
And honestly? The way most people compare lighting is backwards. They look at the unit price, maybe the wattage, and call it a day. I did that for the first two years. Then I started tracking what we actually spent after installation, and the numbers told a very different story.
So here's what I want to do: compare four lighting decisions on total cost of ownership (TCO), not upfront price. The comparisons are recessed light vs downlight, premium grow lights vs budget alternatives, smart controllers vs manual ones, and flood lights vs bar chandeliers. Each one has a different winner depending on your situation — and at least one of my conclusions surprised me.
Recessed light vs downlight: the $2,400 mistake I made in 2023
This is the comparison most facility managers get wrong, partly because the terms get used interchangeably. Here's how I think about it: recessed lights sit flush or near-flush with the ceiling, giving you a clean line. Surface-mounted downlights hang below the ceiling — easier to install, easier to swap out, usually cheaper per unit.
When we were finishing a 3,000-square-foot client-facing space in early 2023, I went with surface-mounted downlights. Saved about $1,800 compared to the recessed light quote. Felt like a win at the time.
Then clients started visiting. Two separate people — not lighting people, just regular clients — used the word "cheap" to describe the space. One asked if we were "still in the build-out phase." That stung.
We ended up redoing the ceiling with recessed lights about eight months later. Total cost of the redo: roughly $4,200, including patching, repainting, and the fixtures. Net loss against my "savings": about $2,400.
My takeaway: in client-facing areas, recessed lights win on TCO almost every time. The visual cleanliness is part of your brand whether you like it or not. In back-of-house spaces — storage, maintenance corridors, staff break rooms — surface-mounted downlights are fine. Nobody's judging your brand by the light above the mop sink. But for any space a customer walks into, budget for recessed. The money you "save" on downlights tends to come back as a perception cost.
One thing I'm still not sure about: whether the 2023 refresh would have landed differently if we'd used better downlights instead of the cheapest option. I suspect quality matters more than form factor in some cases, but I haven't tested it, so take that with a grain of salt.
Grow lights: why the SE7000 comparison isn't about price per watt
Our indoor grow area is where TCO gets interesting. When we first set up about 50 fixtures for a 4,000-square-foot growing space, I had two quotes on the table. One was a budget LED panel, around $520 per unit. The other was the Spider Farmer SE7000, closer to $800 per unit.
Quick math said the budget option saved us about $14,000 upfront. My finance brain liked that number.
Here's what I missed: PPFD degradation. I didn't fully understand it at the time, but LED chips lose output over months of continuous use. In my tracking, the budget fixtures were down to roughly 65-70% of their initial output within 18 months. We were supplementing with extra units just to keep the same light levels. By month 24, we'd replaced about half of them.
The SE7000 fixtures, based on our PAR meter readings, held above 85% output at the three-year mark. Same grow cycles, no replacements, and the plants didn't show the stretching we saw under the degraded budget lights.
Three-year TCO comparison (rough estimate from my records, 50 units):
- Budget option: ~$26,000 initial + ~$13,000 in replacements + higher electricity use (lower efficiency meant longer run times) ≈ $42,000-45,000 range
- SE7000 option: ~$40,000 initial + minimal replacements + lower electricity use ≈ $41,000-43,000 range
The numbers land close, which honestly surprised me. I expected the premium option to be clearly more expensive. But the gap closes when you factor in replacements and the fact that we were running degraded lights longer to compensate. Plus the crop consistency was noticeably better, which matters more to our clients than to my spreadsheet.
Would I recommend SE7000 to everyone? No. If you're running a short-cycle operation and replacing lights annually anyway, the budget math might work out differently. But if you're planning three-plus years of continuous use, the premium option tends to pull ahead on TCO.
Smart fan controllers: the surprise ROI win
This comparison is pretty simple: manual fan control vs a smart controller like the Spider Farmer GGS system, which links to Zigbee and adjusts based on temp and humidity readings.
I have mixed feelings about smart controllers in general. Part of me thinks they're overengineered — another app, another login, another thing to break. Another part of me remembers the energy bills when we ran fans on timers.
In our grow area, we were running exhaust fans roughly 14-16 hours a day on a fixed schedule because that's what the timer was set to. Smart control brought that down to about 10-11 hours based on actual conditions. At our electricity rate (around $0.14/kWh), that saved roughly $650-800 per year across the fans.
The controller cost about $180. Payback period: three to four months. I wasn't expecting that. I thought of the controller as a convenience purchase. Turns out it was basically an energy efficiency purchase that also happened to be convenient.
If you're running a smaller setup with one or two fans, the math is less compelling. The controller cost stays similar but the savings shrink. For our scale, though, this was one of the few "tech upgrade" decisions I'd make again without hesitation.
Flood lights vs bar chandeliers: lighting different messages
This comparison isn't really about which is better — they serve different functions. But I want to talk about where each one causes cost overruns.
Flood lights are workhorses. High output, wide coverage, used in warehouses, growing spaces, and outdoor areas. The cost trap here is cheap floods that flicker or have poor color rendering. We tried a budget flood light line for our loading area in 2022. Two fixtures failed within seven months. The flicker was so bad our night shift complained. Replaced them with mid-tier units, and those have been running four years without issue. The cheap versions weren't cheaper — they were just an installment plan on a better fixture.
Bar chandeliers are a different story. These show up in retail spaces, showrooms, and anywhere clients form a first impression. I've made my peace with spending more here. When we redid our product display area in 2024, we went with bar chandeliers that cost about 40% more than the basic option. Client feedback on the space specifically mentioned the lighting — unprompted. That never happened with the budget options we'd used before.
The pattern I keep seeing: in back-of-house areas, buy the reliable workhorse (mid-tier flood lights are fine). In client-facing areas, spend on the impression. Neither of these is controversial once you've lived through both mistakes.
So what should you actually do?
If I had to compress six years of lighting procurement into a short set of rules, here's what it looks like:
- Client-facing spaces: recessed lights, mid-to-premium bar chandeliers, and don't skimp on color rendering. The perception cost of buying cheap is higher than the fixture cost of buying good.
- Back-of-house and storage: surface-mounted downlights and mid-tier flood lights are perfectly fine. Nobody's evaluating your brand in the stockroom.
- Growing areas: run the TCO numbers including PPFD degradation, not just price per fixture. The SE7000 comparison surprised me — it was closer than I expected, but the premium side won once replacements and crop consistency entered the picture. If you're running short cycles, the math might flip.
- Controls: smart fan controllers paid for themselves in under four months at our scale. At smaller scale, the ROI takes longer. Run your own numbers, but don't dismiss it as a convenience purchase.
One more thing I'd say to anyone comparing lighting options right now: build a simple spreadsheet. Track initial cost, expected lifespan, replacement cost, and energy use together. My projections have been wrong more often than I'd like to admit, but the spreadsheet catches the big misses. That's usually enough.